11111m2 Clearwater Bypass Separator | NSBE020

TheClearwaterBypass Separator NSBE020 is suitable for areas up to 11,111 sq/m. Bypass separators are used when it is considered an acceptable risk not to provide full treatment, for very high flows, and are used, for example, where the risk of a large spillage and heavy rainfall occurring at the same time is small, e.g.

• Surface car parks

• Roadways

• Lightly contaminated commercial areas

Environment Agency PPG3 Guidelines stipulate that all separators must be fitted with a robust system to provide an audible and visual alarm if the oil level becomes too high. We strongly recommend that you purchase either the Darcy Mains Alarm **** **** with this item, and it will be delivered with the separator ready to wire in.

Benefits

• Light and easy to install

• Inclusive of silt storage volume

• Fitted inlet/outlet connectors

• Vent points within necks

• Extension access shafts for deep inverts

• Maintenance from ground level

• GRP or rotomoulded construction (rotomoulded for NSBP003, NSBP004 and NSBP006)

Clearwater Bypass Separator Guidelines Class 1– NSBE010-NSBE125

Clearwater Bypass Separator drawing – NSBE010-NSBE030

PLEASE CONTACT US FOR AN ACCURATE LEAD TIME

sales@direct-drainage.co.uk