In stock at supplierZinsser ZN7200274D1 Allcoat® Exterior Anthracite 1 Litre
ZinsserProduct codePTDZINACEAN1L
Price
£26.05 ex. VAT
Delivery · from Power Tools Direct
- Next-day available (order by 12:00)
- Typically ships in 3–5 days
- Free delivery over £250
Description
Zinsser AllCoat® Exterior is the best performance all surface paint. Designed for the long term decoration of timber metal masonry plastic concrete cladding and more it forms a Vapour permeable low maintenance water-shedding coating re-coatable in 1 hour. AllCoat® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces AllCoat® Exterior is ideal for new or previously painted wood UPVC galvanising metals cladding weathered bitumen stucco brick stone cured concrete and more. AllCoat® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs there is no need to purchase a separate primer. After removing existing mould and mildew two coats of AllCoat® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser AllCoat® Exterior gives excellent resistance against: Cracking blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean dry sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser AllCoat® Exterior has the following specification: Size: 1 litreColour: Anthracite Application Shake or stir well before using. Apply with synthetic bristle brush roller or sprayer. For airless spraying use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.PTDZINACEAN1L
More from Power Tools Direct
View supplier
Reisser 9200S22050050B R2 Screws Csk Pzd Ft Yellow 5.0 X 50 Bulk Box Qty 3000
Reisser£56.95 ex. VAT

Stanley® Air Compressors 9045671STN Air Tool Kit 8 Piece
Stanley® Air Compressors£34.78 ex. VAT
Pack of 8 · £5.22 each

Stanley® Air Compressors 9045717STN Air Tool Kit 6 Piece
Stanley® Air Compressors£17.90 ex. VAT
Pack of 6 · £3.58 each

Dewalt Power Tools DCE050N-XJ Dce050N Transfer Pump 18V Bare Unit
DeWALT Power Tools£197.32 ex. VAT