Underfloor Heating Element Ecofilm Set 300mm

ECOFILM SET underfloor heating elements offer a fast, clean installation with no requirement for self-levelling compound, making them ideal for modern renovation and retrofit projects.

The system is available in three different widths with standard lengths up to 10m. Each element can be trimmed on site if required and is supplied with 5m pre-wired cold tails for simple connection. Two heat outputs are available — 130W/m² for living areas and bedrooms, and 160W/m² for higher heat demand areas such as conservatories.

This ultra-slim carbon film heating solution provides even, comfortable radiant warmth beneath floating floors while maintaining a very low floor build-up.

ECOFILM SET is NOT designed for wet areas such as bathrooms or shower rooms. For those spaces, foil or heating mat systems are typically more suitable.

For a full comparison of systems, see our Electric Underfloor Heating Systems Collection Guide.

Key Features

• Dry installation — no screed or levelling compound required

• Ultra-low build height (under 7mm)

• Suitable for laminate and engineered wood floors

• Compatible with carpet and vinyl when used with ECOMAX-DUO overlay boards

• Fast installation with pre-wired heating elements

• Available in 130W/m² and 160W/m² outputs

• Even heat distribution across the entire floor surface

FAQ’s

What flooring can ECOFILM SET be used with?

ECOFILM SET is designed for laminate flooring and engineered wood flooring. It can also be used with vinyl or carpet when installed with ECOMAX-DUO overlay boards.

Do I need insulation under ECOFILM SET ?

Yes. A suitable insulation layer such as ECOMAX-LITE improves efficiency, reduces heat loss and speeds up warm-up time.

Can ECOFILM SET be used as primary heating?

Yes — in well-insulated homes, ECOFILM SET can provide primary heating. In other cases, it works effectively as a supplementary heating system.

Is ECOFILM SET suitable for bathrooms?

No. This system is designed for dry environments only. For bathrooms or wet rooms, foil or embedded heating systems should be used instead.

Does ECOFILM SET require screed?

No. It is a fully dry installation system and does not require screed or levelling compound, making it ideal for quick installs.

How quickly does ECOFILM SET heat up?

The heating film reacts quickly, with warmth typically felt within 20–30 minutes depending on floor finish and insulation levels.

Learn more about installation and performance in our Carbon Film Underfloor Heating Guide and see real usage examples in the Carbon Film Running Costs Guide.