EVERBUILD® Gun A Nail® Standard – 310ml

High-Strength, Solvent-Free Grab Adhesive for Interior Applications. EVERBUILD® Gun A Nail® Standard is a high-strength, gap-filling, multi-purpose building adhesive based on a tackified solvent-free system. It is designed for a wide variety of building and home improvement applications where at least one of the substrates to be bonded is porous.. Key Features & Benefits. Solvent-Free: Environmentally friendly formulation with no hazardous solvents.. Excellent Adhesion: Adheres to most common surfaces, including damp substrates.. High Initial Grab: Exceptional early grab properties suitable for both vertical and horizontal positions.. Gap-Filling: High solids formulation provides excellent gap-filling properties without shrinkage.. Extended Open Time: Allows for easy repositioning after fixing.. Water Clean-Up: Tools and excess adhesive can be cleaned with water before curing.. Ideal For. Bonding dado rails, architraves, and skirting boards.. Fixing wall cladding directly to internal wall surfaces or timber battens.. Fixing battens directly onto walls without fastenings.. Bonding carpet gripper systems to most floors without the need for nails or tacks.. Bonding stair nosing to concrete or wooden stairs.. Securing aluminium or other skin panels to the framework of portable industrial buildings and caravans.. Product Details. Colour: White. Packaging: 310ml cartridge. Density: 1.50 – 1.60 g/cm³. Solid Content: 75 – 80%. Service Temperature: -10°C to +70°C. Open Time: Maximum 10 minutes at 23°C and 50% RH. Curing Time: 24–48 hours depending on substrates. Shelf Life: 24 months from date of manufacture. Storage Conditions: Store in original unopened containers between +5°C and +25°C. Application Instructions. Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and other contaminants. Wood, plaster, and brick may be damp but not running wet.. Application: Cut the tip of the cartridge, attach the nozzle, and cut an aperture to the required width. Apply using a standard sealant gun.. Bonding: Apply the adhesive to one surface in strips or daubs. Bring the two surfaces together immediately and apply even pressure across the bond line.. Repositioning: If necessary, adjust the positioning within the open time before the adhesive sets.. Clamping: For heavy items, provide temporary support until the adhesive has dried.. Limitations. Not suitable for use where both surfaces are non-porous (e.g., plastic/plastic or metal/metal); use EVERBUILD® Gun A Nail® Extra in such cases.. Not recommended for use as a mirror adhesive; use EVERBUILD® Mirror Mate® instead.. External applications may result in slower curing; for such applications, consider using EVERBUILD® Gun A Nail® Extra.. Cleaning of Tools. Clean tools and excess adhesive immediately with water before the adhesive cures. Cured adhesive must be removed mechanically.