16,670m2 Clearwater Bypass Separator | NSBE030

TheClearwater Bypass Separator NSBE030 suitable for areas up to 16,670 sq/m. Bypass separators are used when it is considered an acceptable risk not to provide full treatment, for very high flows, and are used, for example, where the risk of a large spillage and heavy rainfall occurring at the same time is small, e.g.

• Surface car parks

• Roadways

• Lightly contaminated commercial areas

Features and Benefits

• Light and easy to install

• Inclusive of silt storage volume

• Fitted inlet/outlet connectors

• Vent points within necks

• Extension access shafts for deep inverts

• Maintenance from ground level

• GRP or rotomoulded construction (rotomoulded for NSBP003, NSBP004 and NSBP006)

To specify a nominal size bypass separator, the following information is needed:

• The calculated flow rate for the drainage area served. Our designs are based on the assumption that any interconnecting pipework fitted elsewhere on site does not impede flow into or out of the separator and that the flow is not pumped

• The drain invert inlet depth

• Pipework type, size and orientation

Clearwater Bypass Separator drawing – NSBE010-NSBE030

PLEASE CONTACT US FOR AN ACCURATE LEAD TIME

sales@direct-drainage.co.uk