Ecofilm Carbon Film Underfloor Heating Element Set 500mm – Energy Efficient Electric Floor Heating

ECOFILM SET 500mm Underfloor Heating Element

ECOFILM SET 500mm Underfloor Heating Element is an ultra-slim carbon film heating solution designed for fast, clean installation under floating floors. As a dry installation system, it requires no screed or self-levelling compound, making it an ideal choice for renovation projects where floor height must be kept to a minimum.

This modern radiant heating element delivers gentle, even warmth across the entire floor surface, improving comfort while helping to reduce reliance on traditional wall-mounted heating systems. The ECOFILM Set is available in two power outputs — 130W/m² for living areas and bedrooms, and 160W/m² for higher heat demand spaces such as conservatories.

EcoFilm carbon film heating is primarily designed for use beneath laminate and engineered wood flooring. It can also be installed under carpet or compatible vinyl flooring when used with suitable overlay boards. For full installation guidance and floor build-up advice, see our Underfloor Heating Overlay Board Guide.

This system is suitable for dry areas only and should not be installed in bathrooms or wet rooms. For buyers comparing heating options, our Electric Underfloor Heating Systems Collection Guide explains when carbon film heating is the best choice compared with heating mats, loose wire or foil systems.

Its ultra-low build height makes ECOFILM particularly popular for renovation and retrofit projects, where maintaining door clearances and floor levels is important.

To achieve the best efficiency and performance, EcoFilm should always be installed over a suitable insulation layer. You can estimate the correct heating output for your room using our Underfloor Heating Calculator.

Learn more about installation methods, floor compatibility and performance benefits in our Carbon Film Underfloor Heating Guide. You can also review realistic usage examples in our Carbon Film Running Costs Guide.

For precise temperature control and improved energy savings, we recommend pairing EcoFilm heating with a programmable or smart thermostat. Our Underfloor Heating Thermostat Guide explains how to choose the right control for your system.

ECOFILM SET is NOT designed for use in wet areas such as bathrooms or shower rooms.

Key Features

• Dry installation – no screed or levelling compound required

• Ultra-low build height (typically under 7mm)

• Even heat distribution across the floor

• Suitable for laminate and engineered wood floors

• Compatible with carpet and vinyl when used with overlay boards

• Available in 130W/m² and 160W/m² outputs

• Fast installation with pre-wired elements

FAQ’s

What flooring can EcoFilm be used with?

EcoFilm is designed for laminate and engineered wood flooring. It can also be used with vinyl or carpet when installed with suitable overlay boards such as ECOMAX-DUO.

Do I need insulation under EcoFilm?

Yes. A suitable insulation layer improves efficiency, reduces heat loss, and helps the system warm up faster.

Does EcoFilm require screed or levelling compound?

No. It is a fully dry installation system, making it much quicker and cleaner to install than traditional systems.

Is EcoFilm suitable for renovation projects?

Yes. Its ultra-low build height makes it ideal for retrofit projects where floor height is limited.

Can EcoFilm be used as the main heating source?

In well-insulated rooms, EcoFilm can be used as a primary heating system. In other cases, it works very effectively as supplementary heating.

Can EcoFilm be used in bathrooms?

No. EcoFilm is not suitable for wet environments. For bathrooms, foil or heating mat systems are more appropriate.

Recommended Installation Components

• ECOMAX-LITE insulation boards – improve efficiency and reduce heat loss

• ECOMAX-DUO overlay boards – required for vinyl or carpet installations

• Programmable thermostat – such as Heatmiser Slimline-E or Flexel Touch WiFi Thermostat