Welded Masonry Joist Hangers - Stainless SteelThe TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work rake out existing brickwork. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.Welded Masonry Joist Hangers - Stainless SteelThe TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work rake out existing brickwork. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.Conforms to Eurocode 6 and service class 3Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timberPack Type UnitPack Qty 1Approval BS 5628H (mm) 165B (mm) 80Service Class 3T (mm) 2.4Pack Quantity Unit EachSafe Working Load (kN) 3.5Characteristic Value (kN) For Eurocode 5 6.7Nail Holes (3.75mm) 6Material Austenitic Stainless Steel (A2-304)Corrosion Rating (1-5) 4 - Urban & industrial areas with a moderate salt atmosphereMOQ 6MOQ Increment 6Joist Size W x H (mm) 47 x 175W (mm) 47Type WeldedCE Standard BS EN 845-12013Eurocode 6Packs per Carton 6Pack Dimensions L x W x H (mm) 80 x 47 x 165Pack Weight (kg) 0.4PTDTIM47175WMHS
In stock at supplier
