Anima

Anima is a matte, damask-style decorative wall plaster finish by Loggia, ready to use and crafted to add elegance and personality to interior spaces. Its velvety soft-touch feel and subtle, cloudy effect texture creates a warm, sophisticated ambiance perfect for refined interiors.

YIELD: 12m2 per L

Anima by Loggia—which is made from a combination of special resins and mineral fillers. Here's what that means:

Special resins: These are usually acrylic, polyurethane, or similar synthetic resins that provide durability, adhesion, and the soft-touch effect. They form the "film" or binder that holds the product together and sticks it to the surface.

Fillers: These are fine mineral powders (like silica or marble dust) that give the product body, texture, and a specific tactile feel—often velvety or suede-like in high-end decorative finishes.

Together, these ingredients create a matte, tactile, and visually rich surface. The phrase “chromatic characteristics” in the data sheet refers to how the product plays with colour and light, often giving subtle variations or a soft, cloudy appearance.

WHERE CAN IT BE APPLIED

Interior walls in residential or commercial spaces

Application Process:

Surface Preparation: Ensure the surface is clean, dry, and smooth. Use appropriate fillers if necessary, sand with P120 grit paper, and apply a coat of Fissacril acrylic fixative diluted with water (1:1 to 1:3 ratio). After 4-5 hours, apply two coats of u niversal Primer, also the primer must be white or the same tone of colour that was chosen for ANIMA.

Anima Application:

First Coat: After approximately 8 hours from the final primer application, apply Anima using a stainless steel trowel with semicircular movements to achieve the desired effect.

Second Coat: Wait 4-6 hours before applying the second coat to enhance depth and texture.