Reclaimed Workshop Boards

These original Reclaimed Pine boards have been salvaged from the roof of a workshop built in approx 1910. Beautiful time worn face and original surface markings.

Approx 360m2 in stock

• Product: Engineered reclaimed pine floorboard

• Surface texture: Hand sanded original surface

• Engineered wear layer: 6mm reclaimed pine.

• Ply Spec: 15mm FCS BB/BB Birch plywood EN314-2 class 3, EN636-2, EN13986

Width: approximately 140mm.

• Thickness - 21mm

• length: Approximately 2.3m.

• Holes: Yes - larger ones will be filled.

• Cracks: Yes - larger ones will be filled.

• Finish: Wax

• Colour variation: Yes, typical with reclaimed timber.

• Joint detail: Hand-worked tongue and groove.

Fixing methods: Guidlines Only

• Solid boards must be face fixed into joists

• Fully glue down: Engineered only

• Face nail or secret nail: Yes

• Float: No

• Use over under floor heating: Engineered only, check with UFH manufacturer's guidelines