2 component Polyurethane Sealer

Protect your floors and showers with our 2 component Polyurethane Sealer. Ideal for waterproof protection on surfaces such as microcements, Venetian plaster,acylic products like Plasma 3D and more.

Choose from 30 gloss(Satin), lucido (gloss) or opaco (matt) finishes. Expertly formulated with the highest quality ingredients for long-lasting results.

Comes in 30 gloss(matt sheen), lucido (gloss), opaco (opaque).

Depending on the amount of Part B you mix depends on the strength gloss-

Catalys ratio-

Microvetro BILucido (gloss): mix component part A with part B at 24% and with water at 10%. - 2.5L of Lucido part A mix 24% of part B which is 600ml = 3.1L and 10% of water which you add 310ml

Microvetro BI***30 gloss (satin):***mix component A with B at 20% and with water at 10% - 2.5L of 30 Gloss part A mix 20% of part B which is 500ml =3L and 10% of water which you add 300ml

*** Microvetro BI Opaco (matt) : *** mix component A with B at 10% and 20% water ** * - ***2.5L of Opaco part A mix 10% of part B which is 250ml = 2.75L plus 20% of water which you add 550ml

****Wait 2-3 minutes before the application

APPLICATION PROCESS:

Apply the product with the roller in a quantity enough to cover the surface; apply a last roll on the surface in light way, without pressure to avoid bubbles; do not pass again on the already spread out clear, minimizing the overlaps with the purpose to reduce the formation of shades in phase of drying. The film of varnish is white milky, but drying it becomes perfectly becomes transparent and polish.

We recommend 1 coat on walls

3 coats in Showers/wetrooms and floors

Yield- 10sq per L per coat

3L = 30m2 for 1 coat or 10m2 for 3 coats

We recommend to only mix what you will use for each coat as to not to waste product, as with being a 2 component this cannot be used at a later date if part A & part B have been mixed together.