5000L Underground Rainwater Harvesting System for Medium (150 m2) to Large Gardens (250 m2) Silver

The shallow dig flat rainwater tank was specially developed for rainwater harvesting. This 5000 Litre Shallow Dig Rainwater Harvesting System also has a small footprint allowing you to utilise those small, out of the way spaces which allows you to harvest a substantial amount of rainwater. This package includes a High-Performance Submersible Pump and a Gutter Mate Filter Assembly (add more from drop down if required) which are vital to use with a tank this size. The Gutter Mate Filter is fitted to the downpipe and filters the rainwater before it goes into the tank with the included Fine Mesh Insert. This 5000 Litre Underground Rainwater Harvesting System includes all the components required for collection, storage and distribution of rainwater around the garden. Included with your order: 1 x 5000 Litre Shallow Dig Tank1 x Gutter Mate Diverter & Filter in Black & Fine Mesh Insert Bundle1 x Submersible Pump with integrated pressure and flow control unit. 1 x Fittings and Hose to internally connect Pump to MDPE Hose1 x 50 Metre Reel of Hose to MDPE Hose with end Fittings.1 x Wood Effect Garden Watering Post in Walnut 3000L Underground Rainwater Tank The shallow dig flat rainwater tank was specially developed for rainwater harvesting and is available in sizes of between 1,500 and 7,500L. With a low installation depth being required, this means there is a shorter installation time which results is a lower cost. Specification: Low installation depth means a short installation time and low installation costs Integrated filter technology due to tank filter packages Suitable for pedestrian loading Groundwater-stable up to the tank shoulder thanks to extremely stable design Easy transport due to low weight Secure investment thanks to 15-year warranty The Platin tank can be extended in any way Dimensions:2890mm L x 2300 W X 1315mm H Weight:250kg Submersible Pump with integrated pressure and flow control unit. For use in areas where a large head height or high pressure is required. Will operate to a maximum depth of 10 Metres. This all-in-one submersible booster pump is suitable for pumping clean water for domestic and commercial use in a well or in above or below ground tanks.The pump comes with an integrated pressure and flow control unit. Other Key FeaturesAutomatic start when pipe pressure falls below 2.2 barMaximum installation depth is 10m below water levelThe booster is silent when submergedAn alternative to surface-mounted pumpsHas built-in thermal protection, to stop the pump from overheating and automatically restarts when it has cooled down.Comes equipped with a 15m supply cable Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 40 °CSelected liquid temperature: 20 °CDensity: 998.2 kg/m³ Technical:Actual calculated flow: 3.022 m³/hResulting head of the pump: 23.76 mMax. Particle: 1 mmApprovals: CE,VDE,WEEECurve tolerance: ISO9906:2012 3BReturn valve: YESAdjustable start pressure: NStart pressure: 1.5 barRated driver speed: 2800 rpm Materials:Pump housing: CompositeImpeller: Composite Installation:Range of ambient temperature: -10 .. 50 °CType of inlet connection: STRAINERPump outlet: G 1"Maximum installation depth: 10 m Electrical data:Power input P1: 0.8 kWRated power - P2: 0.54 kWMains frequency: 50 HzRated voltage: 1 x 220-240 VRated current: 3.8 AStarting current: 12 ACos phi: 0.94Capacitor size - run: 13 μF/450 VEnclosure class (IEC 34-5): IP68Insulation class (IEC 85): FBuilt-in motor protection: YESLength of cable: 15 mCable type: H07RN-F 3G1Type of cable plug: SCHUKO Others:Net weight: 9.22 kgGross weight: 9.95 kgShipping volume: 0.022 m³ Gutter Mate Filter in Black with Fine Mesh Insert The Award Winning Gutter Mate Filter allows you to recycle rainwater straight from your downpipe. The only rainwater diverter and rainsaver that filters all rainwater before it enters the water butt, tank, drain or soakaway. Collecting rainwater with the GutterMate is both simple and efficient, whether you are saving rainwater to a water butt, tank or a full rainwater harvesting system. Also available in black or brown. The fine mesh insert will help to purify the rain water to a higher degree of rain water filtration (800 micron).The Gutter Mate is designed to accept 68mm, 76mm and 80mm diameter and 65mm and 75mm square downpipes. Wood Effect Garden Watering Post in Walnut The beautiful dark brown wood effect watering post is stylish and useful accessory that works great with even the most basic rainwater harvesting systems. This watering post has been crafted out of a high quality, UV & weather resistant plastic. Aside from providing you with easy access to rain water for you garden and house plants, it also serves as a decorative garden feature. Installation couldn't be simpler, you could eaither screw the base to a suitable surface in your garden or insert the post directly into the ground. The tap shown in the image is included with this product. This post has a Quick Connect snap-on fitting at the back near the base. Dimensions: Height - 100cmWidth - 14cmDepth - 9cmWeight - 3kg - Product Details: Root Catalog, Water Butts Direct Category, Water Tanks, Underground Ground Water Tanks, Silver, Size: Large