Bond-it Bond It FLASH-MATE Low Modulus Lead Silicone 285ml (Grey) - Box of 25 BDLEAD-25

Bond It FLASH-MATE Low Modulus Lead Silicone 285ml (Grey) - Box of 25Description:Bond It Flash-Mate is a high performance, low modulus neutral cure silicone sealant engineered for roofing applications. It cures into a tough, resilient rubber that effectively seals joints, prevents tile lift, and stops ingress of weather, noise, and water. Compatible with a wide range of materials including metals (especially lead), glass, GRP, concrete, plastics, and painted surfaces, it is suitable for both interior and exterior use on roofs, flashing, gutters, and glazing. Supplied in 285ml cartridges, boxed in sets of 25.Specifications:Colour: GreyCartridge size: 285mlBox quantity: 25 unitsTooling time: 5–10 minutesSkin time (at +23 °C, 50% RH): 10–15 minutesFull cure rate: approx. 3 mm/dayApplication temperature: +5 °C to +30 °CService temperature range: −50 °C to +120 °C (continuous exposure)Elongation at break: ~200 %Modulus (secant): 250 NElastic recovery: 100 %Movement capability: ±20 %Density: 1.29 g/cm³Solubility: Insoluble in waterCommodity code: 3214101000Conformance: EN 15651-1, class F EXT-INTShelf life: Minimum 12 months unopenedStorage: +5 °C to +25 °C, dry conditions, protected from frost & direct sunlightFeatures:Low modulus formulation - gentle on lead and dissimilar substratesFast skinning and weatherproof finishPermanently flexible rubber sealExcellent resistance to UV, heat, and ozoneCompatible with lead flashing, glazing, metals, concrete, plastics and painted surfacesIdeal for both internal and external roofing applications