Warwick Shaker MDF Half Wall Panelling Kit

Create a traditional look and feel with our Warwick Shaker MDF Half Wall Panelling Kit. It features rectangular sections below square sections making it appear taller than it is. The overall height of this half wall panelling is around 1200mm (1.2 metres). The finished height will vary depending on how tall your skirting boards are (the panelling sits on top of the skirting). It's created using our cut to size strips of plain, square MDF that come in a variety of finishes: Unprimed - this is a raw MDF finish with no primer or paint applied whatsoever Primed - a single layer of primer is applied and sanded Undercoated - a single layer of primer is applied and sanded before a single layer of undercoat is applied and sanded (super easy to add your top coat) Matt Grey - the boards are treated just like the undercoated option and then our Matt Grey finish is applied to the board (ready to install, no need to add further top coats) Fitting is ridiculously easy, especially as we send the pieces in the sizes required to install. As long as you are fitting the boards as we picture them, you should not need to cut / mitre anything before installation. Simply lay the pieces on the ground to create the panelling. Then transfer these to the wall and use a strong adhesive and / or pins to secure them in place. Both DIY enthusiasts and tradesmen alike use our wall panelling kits to achieve a professional finish every single time. The MDF we use is of the highest quality we're able to source. You can trust that our products are made to last and impress. Included in the kit: 3 x Square MDF Panelling Strip (70mm x 9mm x 2440mm) 8 x Square MDF Panelling Strip (70mm x 9mm x 300mm) 8 x Square MDF Panelling Strip (70mm x 9mm x 700mm) Purchasing 1 of these panelling kits will enable you to cover an approx. area of 2.76 square metres (H - 1.2m, W - 2.3m) provided you use similar measurements and layout to our guide picture.