EVERBUILD® Gun A Nail® Extra – 310ml

High-Strength, Solvent-Based Grab Adhesive for Interior & Exterior Applications. EVERBUILD® Gun A Nail® Extra is a ready-to-use, high-strength, gap-filling adhesive based on a synthetic rubber/resin mix in a solvent carrier. Designed for both interior and exterior applications, it provides excellent adhesion to most common building materials, including non-porous surfaces.. Key Features & Benefits. High Bond Strength: Provides extra bond strength and quick curing in external applications.. Versatile Application: Adheres to wood, plaster, plasterboard, carpet, carpet grippers, metal, glass, ceramics, brick, concrete, cork, uPVC, and certain plastics.. Exceptional Grab: Usable in both vertical and horizontal positions with high initial tack.. Gap-Filling: High solids formulation ensures excellent gap-filling properties without shrinkage.. Weather Resistant: Suitable for exterior use with excellent weathering properties.. Non-Porous Surfaces: Suitable for use where both surfaces are non-porous.. Ideal For. Bonding dado rails, architraves, and skirting boards.. Fixing parquet and cork flooring.. Attaching wall cladding directly to internal wall surfaces or timber battens.. Fixing battens directly onto walls without fastenings.. Bonding carpet gripper systems to most floors without the need for nails or tacks.. Securing stair nosing to concrete or wooden stairs.. Fixing polyester, wood, PVCu, or metal thresholds.. Attaching nameplates, plastic boxes, decorative frames, wall sockets, and junction boxes to most surfaces.. Securing aluminium or other skin panels to the framework of portable industrial buildings and caravans.. Product Details. Colour: Beige. Packaging: 310ml cartridge. Density: Approximately 1.26 g/cm³. Consistency: Paste. Viscosity: 300,000 - 450,000 cP. Solids Content: 72 ± 1%. VOC Content: 28 ± 1%. Flash Point: -10°C. Shelf Life: 12 months from date of manufacture in unopened containers. Storage Conditions: Store in original unopened containers between +5°C and +25°C. Do not store above +30°C. Store as flammable goods.. Application Instructions. Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and other contaminants. New concrete or plaster should be allowed adequate time to dry and mature.. Application: Cut the tip of the cartridge, attach the nozzle, and cut an aperture to the required width. Apply using a standard sealant gun.. Bonding: Apply the adhesive to one surface in strips or daubs. Bring the two surfaces together immediately and apply even pressure across the bond line.. Support: For heavy items, provide temporary support until the adhesive has dried.. Limitations. Do not use on damp surfaces; use EVERBUILD® Gun A Nail® Standard for such applications.. Not suitable as a mirror adhesive; use EVERBUILD® Mirror Mate® instead.. Do not use on polystyrene, Styrofoam, or expanded polyurethane; use EVERBUILD® Gun A Nail® Standard for these materials.. Heavy materials (greater than 8 kg per m²) must be supported for at least 8–24 hours depending on the size of the item.. Solvents present may attack sensitive plastics. If in doubt, test a small area first.. Cleaning of Tools. Clean tools and excess adhesive immediately with white spirit. Cured adhesive must be removed mechanically.