Bond-it Bond It Mitre Kit - Gap-Filling Adhesive & Accelerator (Box of 12) BDMI-12

Bond It Mitre Kit - Gap-Filling Adhesive & Accelerator (Box of 12)DescriptionBond It Mitre Kit is a high-performance, high-viscosity ethyl cyanoacrylate adhesive combined with an accelerator spray, designed to provide rapid bonding and excellent gap-filling properties. This twin pack ensures a fast, clean, and reliable bond - perfect for fine joints such as mitres where precision and appearance matter. It is ideal for use on porous and uneven surfaces such as MDF and oak, making it a favourite among joiners, carpenters, and fitters.Features & BenefitsRapid bonding – parts can be handled almost immediatelyNon-drip formula – ideal for vertical applicationsGap-filling performance for uneven or porous surfacesWorks effectively on difficult substrates such as MDF and oakSpeeds up strength development for immediate usabilitySuitable ForMDF, chipboard, and all common timbers (oak, pine, etc.)PVCu and most plasticsRubber and leatherGeneral joinery and woodworking applicationsDecorative mitres and precise bonding workLimitationsNot suitable for permanent glass bondingDo not use on oily or greasy surfacesMay cause staining on uPVC if accelerator is over-applied - always test on a small area firstAvoid strong light and high heat exposureApplication InstructionsPreparation: Ensure both surfaces are clean, dry, and free from dust, oil, or contaminantsAccelerator: Spray lightly over one surface and allow to dry. Use on the least visible face of the joint where possibleAdhesive: Apply adhesive to the opposite surface and immediately bring the two parts togetherBonding: Apply light, even pressure until the bond forms (typically within 10 seconds)Clean-up: Wipe away any uncured adhesive using a dry cloth. Once cured, remove mechanicallyTechnical DataAdhesive Type: Ethyl CyanoacrylateActivator Type: Aerosol AcceleratorColour: ClearViscosity (Adhesive): 1400–1700 mPa·sGap Filling: Up to 0.25 mmTensile Strength (ASTM D2095): 20 MPaTensile Shear Strength (ASTM D1002): 14 MPaService Temperature Range: -60°C to +80°CGrab: Very high initial grabDrying Time: 10 secondsFlash Point: > +81°C (Adhesive), < -40°C (Activator)Flammability: Aerosol extremely flammableDensity: 1.06 g/cm³Commodity Code: 3506990000Storage & Shelf LifeShelf Life: Minimum 12 months from date of manufactureStorage Conditions: Store upright in a cool, dry place between +5°C and +25°CProtect from frost, heat, and direct sunlight