Kingfisher Kolourseal Roof Renovation - High-Performance Roof Coating for Tile & Sheet

Kingfisher Kolourseal Roof Renovation. High-Performance Roof Coating for Tile & Sheet Restoration. Kingfisher Kolourseal is a high-performance styrene acrylic polymer coating engineered to restore, protect, and transform faded or weathered roof surfaces. Designed specifically for concrete tiles, clay tiles (excluding Rosemary), artificial slate, and certain cement fibre sheets, this durable coating extends the life of roofing materials by at least 10 years.. The advanced micro-porous formulation allows trapped moisture to escape from the substrate, preventing blistering, delamination, and adhesion failure—while remaining fully waterproof against mass rainwater penetration. The UV-resistant pigments ensure long-term colour stability, even under extreme weather conditions.. Key Features & Benefits. UV-Stable Acrylic Resin: Provides long-lasting colour retention and surface protection. Micro-Porous Technology: Allows moisture vapour to escape while blocking water ingress. Extends Roof Life: Adds at least 10 years of protective performance to aged roof tiles. Weather Resistant: Shields against UV degradation, rain, frost, and environmental contaminants. Low Sheen Finish: Enhances visual appearance without high-gloss shine. Wide Colour Range: Choose from popular architectural shades for roof enhancement. Product Details. Finish: Matt/Satin (depending on surface porosity and application method). Colours Available: Black, Anthracite, Stoker Grey, Dove Grey, Spanish Terracotta, Terracotta Clay, Dark Terracotta, Lakeland Green, Earth Brown. Pack Sizes: 20 kg pails with airtight snap-ring seals. Coverage: 5–6 m² per litre per coat (two coats recommended). Drying Time: Touch dry in 1–4 hours; fully cured in 24 hours at 20 °C. Application Temperature: +7 °C to +35 °C. Shelf Life: 12 months (unopened, stored correctly). Application Instructions. Surface Preparation: Thoroughly clean the roof surface using a pressure washer. Remove all moss, algae, lichen, dirt, and surface grime.. Biocidal Wash: After drying, apply Kingfisher Biocidal Wash to inhibit future growth of moss, algae, and lichen. Allow to dry fully before proceeding.. Repairs: Replace any cracked or broken tiles. Secure all loose elements. Point ridge tiles where necessary using a suitable mortar.. Masking: Use masking tape or sheeting to protect skylights, solar panels, gutters, fascias, and other fixtures from overspray or brush marks.. Application: Apply Kolourseal using a brush or airless sprayer. Stir thoroughly before use. Two coats recommended for best performance, with 2–4 hours between coats.. Post-Application: Avoid application if rain is forecast within 24 hours. Ensure adequate ventilation during and after use.. Suitable Substrates. Concrete roof tiles. Clay tiles (except Rosemary tiles). Artificial slate. Asbestos cement sheets. Certain mineral-based sheet roofs. Safety & Storage. Ensure surface is dry and free from frost before application. Wear protective gloves and eyewear during use. Keep out of reach of children. Store upright in original container in a cool, dry place. Do not allow to enter drains or watercourses. Kolourseal Roof Renovation is the professional solution to reviving and protecting aged roofing with a flexible, breathable, and aesthetically pleasing finish. Trusted by contractors and DIY renovators alike for over a decade.